Install the Soft-close motor

• Clip the soft-close motor (3) into the holders (4).
• Connect connector (2).
• Attach Bowden cable (1) to tailgate lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LEFT STORAGE COMPARTMENT .
• Refer to PARTIALLY INSTALLING THE REAR LEFT SOUND INSULATION .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE REAR LUGGAGE COMPARTMENT WELL .
• Refer to INSTALLING BOTH BOTTOM D-PILLAR TRIM PANELS .
• Refer to INSTALLING BOTH FLAPS IN THE LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .