Installing the tailgate lock

• Position tailgate lock (4).
• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Tailgate lock
  M8x20 screw	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (2).
• Attach the Bowden cable (1).

Follow-up work 

• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE REAR LUGGAGE COMPARTMENT WELL .
• Refer to INSTALLING BOTH BOTTOM D-PILLAR TRIM PANELS .
• Refer to INSTALLING BOTH FLAPS IN THE LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .