Remove the optional equipment system (SAS)
NOTE:
RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .
Electrostatic discharge .
Damage to or destruction of electrical components .
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ELECTROSTATIC DISCHARGE (ESD) PROTECTION
Refer to 34 52 250 REMOVING AND INSTALLING OPTIONAL EQUIPMENT SYSTEM (SAS) CONTROL UNIT (X3 M) .
Preliminary work
- Refer to REMOVING FRONT ENTRANCE COVER STRIP .
- Refer to REMOVING THE TRIM PANEL FOR PEDAL MECHANISM .
- Refer to REMOVING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
- Set the carpet aside.
- Slacken nut (1).
- Unscrew the nut (2) and guide out the optional equipment system (SAS) (3).
- Disconnect plug connection (1).