Installing the top air flap control/air duct

• Connect the top air flap control (3) with the appropriate connector.
• Feed in the top air flap control (3).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air flap control/Brake ventilation duct
  Oval-head screw	Tightening torque	4.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air flap control/Brake ventilation duct
  Oval-head screw	Tightening torque	4.0 Nm

Follow-up work 

• Refer to INSTALLING THE FRONT HOOD SEAL .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
• Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH TRIMS .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .