LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2020
>>
X3 M Base
>>
Repair and Diagnosis
>>
Body & Frame
>>
Exterior/Interior Trim
>>
Body Equipment -- Repair (2 Of 2) -- X3 M (F97)
>>
51 47 Floor-Trunk-Engine Compartment-Trim Panel
>>
51 47 491 Removing refitting/replacing rear engine undercover (X3 M)
>>
Installing underbody protection at rear
Installing underbody protection at rear
Feed in rear underbody protection (1) at an angle towards the front.
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
Underbody protection
Hexagon screw
Tightening torque
3 Nm
Courtesy of BMW OF NORTH AMERICA, INC.