Installing the trim panel of the rear luggage compartment

• Connect connectors and lock.
• Position the trim panel (2) of the luggage compartment.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Luggage compartment trim panel to body
  Thermoplastic oval-head screw	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BOTTOM D-PILLAR TRIM PANEL .
• Refer to INSTALLING D-PILLAR TRIM PANEL .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
• Refer to INSTALLING THE BACKREST SIDE SECTION ON THE REAR SEAT BACKREST .
• Refer to INSTALLING THE COVER OF THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING ROLLER COVER FOR LUGGAGE COMPARTMENT .