Installing impact absorber

• Check the impact absorber (2)  for damage and replace if necessary.
• Insert and engage pressure hose (1)  in impact absorber (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach bottom impact absorber (2)  and press upwards.
• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
• Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
• Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .
• Refer to CONNECTING THE BATTERY EARTH LEAD .