If installed: Install the right brake air duct
- Feed in and position brake air duct (4) with the vertical strut (6) .
- Tighten down screw (5)
.Tightening torques
Vertical strut to bumper support M6x20 Tightening torque 12 Nm - Tighten down screw (3)
.Tightening torques
Cross connection to front axle support M6 tightening torque 12 Nm - Tighten the screws (2)
.Tightening torques
Vertical strut to bumper support M6x20
Tightening torque 12 Nm - Tighten down screw (1)
.Tightening torques
Brake air duct to vertical strut TS6x16 Tightening torque 4.5 Nm