Securing the anti-roll bar on the left and right on the anti-roll bar link
NOTE:
Perform the steps on the left and right side.
Fastening the anti-roll bar on the anti-roll bar link
- Position the anti-roll bar link on the anti-roll bar.
- Replace nut (1)
.
Parts: Nut
- Tighten nut (1)
.NOTE: Counter-hold at the Torx socket.
TIGHTENING TORQUE SPECIFICATIONS
| Anti-roll bar link to anti-roll bar/spring strut | ||
|---|---|---|
| M10 Replace nut. |
tightening torque | 56 Nm |