Removing heat shield at upper exhaust turbocharger

WARNING: Hot surfaces  .
Risk of burning! 

• Perform all work only on components that have cooled down.

• Loosen screw (1)  .
• Feed out coolant line (2)  from the holder (3)  and place to one side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1)  .
• Feed out and remove the heat shield (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .
• Feed out heat shield (2)  on the exhaust turbocharger at the top and remove.

Courtesy of BMW OF NORTH AMERICA, INC.