Installing the rear heat shield
- Insert and install the heat shield (4) .
- Tighten the screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body Screws/nut Tightening torque 3 Nm - Tighten nuts (3)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body Screws/nut Tightening torque 3 Nm - Insert and install the holder (2) .
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Holder to body | ||
|---|---|---|
| M8 | tightening torque | 21 Nm |