Install right rear suspension cross-brace
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- (1) Fit and install rear right strut brace.
- Replace nut (3)
.
Parts: Nut
- Tighten nut (3)
.TIGHTENING TORQUE SPECIFICATIONS
Cross-brace to firewall M10
Replace nut.tightening torque 56 Nm Angle of rotation 45° - Replace the screw (2)
.
Parts: Screw
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Strut brace to support bearing | ||
|---|---|---|
| M10 Replace screw. |
tightening torque | 56 Nm |
| Angle of rotation | 90° | |