11 61 Intake plenum
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 BMW X1, 2021 BMW X1, 2020 BMW X1, 2019 BMW X1, and 2018 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.
11 61 INTAKE PLENUM - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Torque Specification | |
|---|---|---|---|
| 1AZ Intake plenum to cylinder head | B46M0/O0/B48M0/O0 | M6 | 10 Nm |
| 2AZ Holder for intake plenum to cylinder head/crankcase | B46M0/O0/B48M0/O0 | M6 | 10 Nm |
| 3AZ Rear intake plenum holder | B46M0/O0/B48M0/O0 | M6 | 10 Nm |
| 4AZ Intake plenum to rear/front holder | B46M0/O0/B48M0/O0 | 8 Nm | |
| 5AZ Holder for wiring harness to intake plenum | B46M0/O0/B48M0/O0 | 5 Nm | |
| 6AZ Tank vent line to intake plenum | B46M0/O0/B48M0/O0 | 5 Nm |