11 11 Engine block
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 BMW X1, 2021 BMW X1, 2020 BMW X1, 2019 BMW X1, and 2018 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.
11 11 ENGINE BLOCK - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (collar screw 11.9) | B46M0/O0/B48M0/O0 | M10x1.5 | Replace screws and screw in hand-tight. | |
| 1. Joining torque | 25 Nm | |||
| 2. Angle of rotation | 60° | |||
| 3. Angle of rotation | 60° | |||
| 2AZ Oil spray nozzle in crankcase | B46M0/O0/B48M0/O0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B46M0/O0/B48M0/O0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B46M0/O0/B48M0/O0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B46M0/O0/B48M0/O0 | M10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B46M0/O0/B48M0/O0 | M14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B46M0/O0/B48M0/O0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B46M0/O0/B48M0/O0 | M8x12 | 12 Nm | |