Install the finisher on the door trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

Saw off all welding pins (1) on the finisher along the molding (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove welding remnants on door trim panel with a scalpel.
Installing finisher.
NOTE: Welding pins must not protrude from the door trim panel.

Screw in and tighten the repair screws (arrows) in the door trim panel.

TIGHTENING TORQUE SPECIFICATIONS

Repair screw to door trim panel
Oval-head screw	tightening torque	2.3 Nm