Installing weather strip on inner rear door

• Coat window recess finisher strip (1)  prior to installation with an approved lubricant.
• If necessary, remove clamps (2)  from window recess finisher strip (1)  and mount on the door.

  Damaged or missing clamps (2)  must be replaced.

• Attach window recess finisher strip (1)  to the door and engage in clamps (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .