Installing guide for rear center bumper panel
- Feed in and install the guide (2).
- Tighten nuts (1).TIGHTENING TORQUE SPECIFICATIONS
Guide for the bumper panel to body Screw Tightening torque 4.6 Nm Nut Tightening torque 4.6 Nm - Clip in the wiring harness into the holder.
Follow-up work
- Refer to INSTALLING REAR BUMPER PANEL .
- Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
- Refer to INSTALLING BOTH TRIM PANELS FOR THE WATER GUTTER .