Install rear bumper support

• Check seals (1) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position bumper support (2).
• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rear bumper support to tail panel
  Nuts M12	Tightening torque	108 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR BUMPER PANEL .
• Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
• Refer to INSTALLING BOTH TRIM PANELS FOR THE WATER GUTTER .