Attach rear spoiler

• Check clips (1) on the rear spoiler (2) for damage, replace if required.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the rear spoiler (1) on the guides (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slide the rear spoiler (1) onto the lower section of the rear spoiler in the direction of the arrow.
• Clip in the rear spoiler (1) with the clips (2) and clip on the latch mechanisms (3) on both sides.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rear spoiler to trunk lid
  Oval-head screw	Tightening torque	3.1 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the covers (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .