Installing the crankshaft sensor
- Guide in and install crankshaft sensor (3) and install.
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATIONS
Crankshaft sensor to timing case cover tightening torque 46 Nm - Connect and lock the connector (1).
- Make sure the connector (1) engages audibly.
Follow-up work
- Refer to INSTALLING FAN COWL WITH ELECTRIC FAN .
- Refer to INSTALLING FRONT CROSS CONNECTION .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .