Install the exhaust camshaft sensor

• Insert and install the exhaust camshaft sensor (3).
• Tighten down screw (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Exhaust camshaft sensor to cylinder head cover
  TS5x20	tightening torque	4 Nm

• Connect and lock the connector (1).
• Make sure connector (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to IF INSTALLED: PARTIALLY INSTALLING ENGINE VENTILATION LINE .
• Refer to INSTALLING ACOUSTIC COVER .