Removing the front carpet
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Refer to REMOVING THE FRONT SEATS ON THE LEFT AND RIGHT .
- Refer to REMOVING ACCELERATOR PEDAL MODULE .
- Refer to REMOVING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE A-PILLAR .
- Refer to REMOVING THE INSTRUMENT PANEL TRIM AT BOTTOM RIGHT .
- Refer to REMOVING FRONT RIGHT DOOR SILL COVER STRIP .
- Refer to REMOVING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE RIGHT-HAND A-PILLAR .
- Refer to REMOVING THE SIDE TRIM PANEL FOR THE LEFT AND RIGHT CENTER CONSOLE .
- Refer to REMOVING GEARSHIFT LEVER COVER .
- Refer to REMOVING THE DECORATIVE TRIM FROM THE CENTER CONSOLE .
- Refer to REMOVING THE CENTER CONSOLE TRIM .
- Refer to REMOVING THE FRONT STORAGE COMPARTMENT .
- Refer to REMOVING THE REAR CENTER CONSOLE TRIM .
- Refer to REMOVING COMPLETE CENTER CONSOLE .
- Refer to REMOVING THE SPEAKER TRIM FROM THE LEFT AND RIGHT CENTER BASS .
- Refer to REMOVING THE DOOR SILL COVER STRIP ON THE REAR LEFT AND RIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANELS AT TOP LEFT AND RIGHT .
- Refer to REMOVING THE LEFT AND RIGHT B-PILLAR TRIM PANELS AT BOTTOM .
- Make the cuts in direction of center of vehicle as far as possible, to guarantee that the cutting edges are covered by the storage compartment or instrument panel.
- Cut the carpet (1)
along the lines on the right and left.
- Cut the carpet (1) along the lines on the right and left.
- Remove the carpet (1)
toward rear/top and if necessary feed out cable.