3355 Rear Anti-Roll Bar
3355 TIGHTENING TORQUE OVERVIEW
| Anti-roll bar link to anti-roll bar | ||
| M12 Replace nut. |
tightening torque | 100 Nm |
| Anti-roll bar link to camber control arm | ||
| M10 Replace screw and nut. Tighten in normal position. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Retainer, anti-roll bar to rear axle support | ||
| M10 Replace screws. |
tightening torque | 56 Nm |