Installing the luggage compartment wheel arch trim panel on the right (partially removed)

• Feed the luggage compartment wheel arch trim panel, right, (2) into the rear area under the sealing lip of the trunk lid seal.
• Install hinge cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the emergency release handle for the tailgate: 

• Attach the Bowden cable (2).
• Fasten the emergency release handle (1) for the tailgate to the holder.

Courtesy of BMW OF NORTH AMERICA, INC.