Install the Head Unit High (HU-H) (with bracket)

NOTE: RISK OF DAMAGE 
Damage to the head unit. 
The hard disk of the head unit can be damaged by vibrations. 

• Carry out mechanical work on the head unit and adjacent components with care.

NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 

• Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

• Position the head unit (1).
• Connect all connectors in the marked area in the correct assembly sequence and lock them in place.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the head unit with bracket (2).
• Lock the locks (arrows).
• Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Bracket, head unit
Screw	tightening torque	2.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: RISK OF DAMAGE 
Damage to the head unit. 
The hard disk of the head unit can be damaged by vibrations. 

• Carry out mechanical work on the head unit and adjacent components with care.

NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 

• Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

• Position the head unit (1).
• Connect all connectors in the marked area in the correct assembly sequence and lock them in place.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the head unit with bracket (2).
• Lock the locks (arrows).
• Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Bracket, head unit
Screw	tightening torque	2.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.