Removing the holder with the vehicle wiring harness for the sensor system of cylinder bank 2

• Loosen screws (2).
• Disengage the coolant ventilation line in area (1).
• Unlock plug connection (3) and disconnect.
• Place aside the holder with the vehicle wiring harness for the sensor system.

Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (2).
• Disengage the coolant ventilation line in area (1).
• Unlock plug connection (3) and disconnect.
• Place aside the holder with the vehicle wiring harness for the sensor system.

Courtesy of BMW OF NORTH AMERICA, INC.