1165 Turbocharger
1165 TIGHTENING TORQUE OVERVIEW
| Coolant lines on turbocharger | ||
| Screw M14x1.5 | Tightening torque | 15 Nm |
| Angle of rotation | 75° | |
| Electric wastegate valve controller to turbocharger | ||
| M4x14 Replace screws. |
Tightening torque | 3 Nm |
| Expansion tank holder | ||
| M6x16 screw | Tightening torque | 8 Nm |
| Gauge of turbocharger to cylinder head cover | ||
| screw | Tightening torque | 10 Nm |
| Heat protection plate | ||
| M6x12 screw Replace screw. |
tightening torque | 10 Nm |
| heat shield | ||
| M6x16 screw | Tightening torque | 8 Nm |
| Heat shield, top | ||
| M6x16 screw | Tightening torque | 10 Nm |
| Heat shield to the turbocharger | ||
| M6 screw | tightening torque | 10 Nm |
| Holders for coolant lines at turbocharger | ||
| M6x16 screw | Tightening torque | 8 Nm |
| Lock nut on wastegate valve controller to turbocharger 6.6 ± 1 Nm |
||
| M6 | Tightening torque | |
| Oil return line at the turbocharger | ||
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
| Oil return line to crankcase | ||
| screw | Tightening torque | 10 Nm |
| Wastegate valve controller to turbocharger | ||
| M4x12 | Tightening torque | 2 ± 0.3 Nm |