Installing the front wheel speed sensor

• Clean bore for wheel RPM sensor and grease using lubricating grease.
  CONSUMABLE SPECIFICATION
  
  

  Lubricating grease Staburags NBU 12K

  100 g, Tube

  83 23 9 407 810

• Install rear wheel speed sensor.
• Position and tighten the screw (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Front wheel speed sensor on swivel bearing
  Screw Replace screw.	Tightening torque	12 Nm

• Connect the cable of the wheel RPM sensor in the holders (1)  .
• Connect the cable of the wheel RPM sensor in the holders (1)  .
• Connect plug connection and close housing cover (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .