5431 CONVERTIBLE TOP, LINKAGE AND ACTUATION (M8 Convertible 2020-2024)
5431 TIGHTENING TORQUE OVERVIEW
| Base plate to window frame | ||
| Screw Replace screws |
tightening torque | 8 Nm |
| Convertible top compartment lid mechanism on bodyshell | ||
| Screw | tightening torque | 19 Nm |
| Convertible top latch to front strut | ||
| Nut Apply Loctite. |
tightening torque | 15 Nm |
| Front strut to convertible top linkage | ||
| Screw | tightening torque | 35 Nm |
| Locking plate to hydraulic unit | ||
| Screw | tightening torque | 6 Nm |
| Rear window to convertible top linkage | ||
| Screw | tightening torque | 4.2 Nm |
| Tension cable to convertible top linkage | ||
| Screw | tightening torque | 11 Nm |
| Windshield panel Gasket to front strut | ||
| Screw | tightening torque | 1.8 Nm |
| Windshield panel trim to front convertible top | ||
| Screw | tightening torque | 2 Nm |
| Windshield panel trim to side convertible top | ||
| Screw | tightening torque | 3 Nm |