5171 Gaskets And Loose Body Parts
5171 TIGHTENING TORQUE OVERVIEW
| Brake ventilation duct on front wheel arch cover front section | ||
| Hexagon bolt for thermoplastic | Tightening torque | 3 Nm |
| Door sill trim panel on body | ||
| Plastic nut for coarse thread | Tightening torque | 3 Nm |
| Door sill trim panel on body | ||
| Hexagon screw for thermoplastic | Tightening torque | 3 Nm |
| Front-end strut, front | ||
| Screw | Snug torque | 28 Nm |
| Angle of rotation | 90° | |
| Front-end strut, rear | ||
| Screw | Snug torque | 56 Nm |
| Angle of rotation | 90° | |
| Front spoiler to bumper cover | ||
| Screw | tightening torque | 2 Nm |
| Front wheel arch cover front section on body | ||
| Hexagon bolt for thermoplastic | Tightening torque | 3 Nm |
| Front wheel arch cover on thrust field | ||
| Hexagon bolt for thermoplastic | Tightening torque | 3 Nm |
| Tension strut on firewall | ||
| M10x25 screw | Tightening torque | 56 Nm |
| Tension strut to shock tower | ||
| screw Replace screws. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Trim for parcel shelf to body | ||
| Hexagon screw for thermoplastic | tightening torque | 3 Nm |
| Wheel arch cover | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch cover (screws) | ||
| Thermoplastic hexagon screw | Tightening torque | 3 Nm |
| Wheel arch trim panel at front on body | ||
| Thermoplastic hexagon screw | Tightening torque | 3 Nm |