5164 Front Panel, Front End
5164 TIGHTENING TORQUE OVERVIEW
| Air duct above to front end | ||
| Oval-head screw with spring washer | tightening torque | 4 Nm |
| Flat-head screw M6x35 | tightening torque | 4 Nm |
| Air duct below at cross member cover | ||
| Hexagon screw for thermoplastic | tightening torque | 3 Nm |
| Air duct frame | ||
| Screw | tightening torque | 2.6 Nm |
| Front cross connection | ||
| Screw | Tightening torque | 11.8 Nm |
| Reinforcement strut on cross connection and bumper bracket | ||
| Oval-head screw M8 | tightening torque | 19 Nm |
| Reinforcement strut on the front cross connection and bumper bracket | ||
| Oval-head screw | tightening torque | 19 Nm |
| Support for top air flap control at the top of the lock | ||
| Combination clamping screw with ISA | Tightening torque | 8 Nm |
| Top cross connection to rear top cross-connection | ||
| Combination clamping screw with ISA | Tightening torque | 8 Nm |
| Top rear cross connection | ||
| Torx screw M8x30 | Tightening torque | 19 Nm |
| Hexagon screw M8x20 | Tightening torque | 19 Nm |
| Top rear cross connection at side | ||
| Tightening torque | M8x30 screw | 19 Nm |
| Top rear cross connection center | ||
| Tightening torque | M8x20 screw | 28 Nm |