5111 Bumper, Front
5111 TIGHTENING TORQUE OVERVIEW
| Bottom bumper bracket on the front subframe. | ||
| M8x100 Replace screws. |
Tightening torque | 19 Nm |
| Bumper cover to underbody planking | ||
| Hexagon screw | tightening torque | 2.6 Nm |
| Car registration number | ||
| Screw TS 5x13 | Tightening torque | 0.7 Nm |
| Cover to holder | ||
| Hexagon screw | tightening torque | 8 Nm |
| Front bumper panel to fender | ||
| Thermoplastic screw 5x35 | Tightening torque | 3 Nm |
| Front bumper panel to undershield | ||
| Thermoplastic hexagon screw | tightening torque | 3 Nm |
| Front spoiler to bumper cover | ||
| Oval-head screw | tightening torque | 3.0 Nm |
| License plate baseplate | ||
| Screw TS 5x16 | Tightening torque | 0.7 Nm |
| Support, bottom, to deformation element | ||
| Flat-head screw M6x20 | tightening torque | 12 Nm |