Removing the A-pillar trim panel on the left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Preliminary work

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the A-pillar trim panel

WARNING: Airbag unit.
Danger! Immobilization period-threatening injuries!

Before working on the airbag, disconnect the negative battery cable from the battery.
Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Loosen screw (1).
Unclip the A-pillar trim panel (2) from the clip (3) and feed out towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.