Install rear trim panel

• Check the clips (1)  on the side trim panel (2)  for completeness and damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock all the connectors on the rear side trim panel (1)  of the wiring harness (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the rear side trim panel (1)  into the clamps (3)  and feed it into the edge protection.
• Clip in the rear side trim panel (1)  with the clips (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING THE REAR SEAT .