Install front axle completely

NOTE: TECHNICAL INFORMATION
Secure component against falling.

Release the screws (1) on the engine oil cooler (2) at left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Position front axle completely under the vehicle.
Position engine oil cooler (1) behind the front axle support (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully lift front axle completely and position on vehicle.

Courtesy of BMW OF NORTH AMERICA, INC.
Position engine oil cooler (2) .
Tighten down screws (1) .

TIGHTENING TORQUES SPECIFICATION

upstream engine oil cooler
M6x45 screw	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.