LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2020
>>
M8 Base, 2D Convertible
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 3)
>>
Remove the holder with the vehicle wiring harness for the sensor system of cylinder bank 1
Remove the holder with the vehicle wiring harness for the sensor system of cylinder bank 1
Loosen screws (1).
Place aside the holder (2) with the vehicle wiring harness for the sensor system.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.