Placing the brake pads on the brake disk/putting them into operation

NOTE: TECHNICAL INFORMATION 
After a brake pad exchange and before pressing the brake pedal: Always apply the electromechanical parking brake.
If this is not observed, a CC message appears and the brake system switches to the emergency program. The brake booster is no longer active.

• Operate/engage electromechanical parking brake (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Depress the brake pedal (1) several times so that the brake pads are in contact with the brake disks.

Courtesy of BMW OF NORTH AMERICA, INC.