Installing the reinforcement strut
- Position the reinforcement strut (3).
- Tighten nuts (2).
TIGHTENING TORQUE SPECIFICATION
| Reinforcement strut on thrust arm | ||
|---|---|---|
| M10 Apply Loctite. |
tightening torque | 62 Nm |
ADHESIVE SPECIFICATION
| Screw lock Loctite Stick 243, medium strength |
10 ml, Bottle | 83192210339 |
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATION
| Reinforcement strut on body | ||
|---|---|---|
| M8x30 | Tightening torque | 28 Nm |
| Angle of rotation | 90° | |