Disconnecting the bleeder unit for the brake fluid

• Switch off bleeder unit (1) and remove it from the brake fluid expansion tank.
• Check the brake fluid level and adjust it to the maximum mark if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the seal of sealing cap (1) for correct fit and damage, replace if necessary.
• Shut sealing cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install the cover of the engine compartment on the rear left 

• Install the cover (2).
• Close lock (1).

Courtesy of BMW OF NORTH AMERICA, INC.