Installing control unit holder for cylinders 1 to 4

• Insert and position control unit holder (1)  with the control units.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that the centering pins (2)  are located in the rubber mounts (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the cable bracket (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the wires and connectors (1)  to the adapter plate.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .

• Engage the cable bracket (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING THE COVER PANEL OF THE MASTER DME CONTROL UNIT .
• Refer to ACTIVATING VEHICLE ELECTRICAL SYSTEM .