Installing engine ventilation line of cylinder bank 1

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Insert the engine ventilation line (2) and turn it counterclockwise.
Tighten down screws (1) .

TIGHTENING TORQUES SPECIFICATION

Engine ventilation line
Screw	Tightening torque	10 Nm

G15067581

Courtesy of BMW OF NORTH AMERICA, INC.

Position engine ventilation line (2) .
Connect and lock retaining clip (1) .

G15196386

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TANK VENTILATION LINE OF CYLINDER BANK 1 PARTIALLY .
Refer to INSTALLING CONDUIT ON BANK 1 .
Refer to INSTALLING EXPANSION TANK FOR THE CHARGE AIR COOLER .
Refer to INSTALLING ACOUSTIC COVER .
Refer to INSTALLING THE COVER PANEL OF THE MASTER DME CONTROL UNIT .