Remove the roof trim strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Carefully release and remove the roof trim strip (1) from the clamps (2) upwards with the special tool 0 496 569 (00 9 325)
starting at the front.
- Equipment version with CFRP roof:
- Carefully release and remove the roof trim strip (1) from the clamps (2) upwards with the special tool 0 496 569 (00 9 325) starting at the front.