Install luggage compartment wheel arch trim panel on right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install luggage compartment wheel arch trim panel
- Install luggage compartment wheel arch trim panel (2) .
- Feed in the luggage compartment wheel arch trim panel (2) under the sealing lip of the tailgate seal and the side trim panel in the rear.
- Insert hinge cover (1)
in the luggage compartment wheel arch trim panel (2)
.
- Secure expanding rivet (1) .
- G16, F93:
Secure expanding rivet (2) .
Installing mounted parts of luggage compartment wheel arch trim panel
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Secure multi-function hook with expanding rivet (4) .
- Tighten screws (3) of lashing eyes (2) .
TIGHTENING TORQUE SPECIFICATION
| Lashing point to body | ||
|---|---|---|
| M8 screw | Tightening torque | 19 Nm |
- Clip in covers (1) of lashing eyes (2) .
Installing the emergency release handle for the tailgate (additional work for US version)
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Attach the Bowden cable (2) .
- Fasten the emergency release handle (1) for the tailgate to the holder.
Follow-up work
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .