Remove left luggage compartment wheel arch trim panel
Preliminary work
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
Precondition
The rear seat backrest is folded down toward the front.
- Unclip covers (1) of lashing eyes (2) .
- Release screws (3) of lashing eyes (2) .
- Open expanding rivet (4)
of bag hook.
- Loosen the expanding rivet (1) .
- G16, F93:
Release expanding rivet (2) .
- Release hinge cover (1) from the luggage compartment wheel arch trim panel (2) and leave it hanging on the hinge bracket.
- Feed out the luggage compartment wheel arch trim panel (2) from under the sealing lip of the tailgate seal.
- Feed luggage compartment wheel arch trim panel (2) out of side trim panel in rear passenger compartment and remove.