Installing windshield
- Prepare the standard tool.
Standard tool:
Cordless cartridge gun
81 49 2 405 782
- Prepare the adhesive.
ADHESIVE SPECIFICATION
| Window glass adhesive (single cartridge) | 300 ml, Rest of World | 83192289286 |
| 300 ml, USA | 83192289181 | |
| 300 ml, CHN | 83192180002 |
- Use standard nozzle C.
TECHNICAL DATA SPECIFICATION
| C-nozzle | ||
|---|---|---|
| For windshields, rear windows, and body-specific side window glass | Diameter A | 7.5 +1-1 min |
| Height B | 13 +1-1 mm | |
CONSUMABLE SPECIFICATION
| C-nozzle | 83192155589 |
- Apply adhesive bead inside the marks (1) perpendicular to the windscreen.
TECHNICAL DATA SPECIFICATION
| Adhesive bead of the windshield | ||
|---|---|---|
| Width a | 8 +3-1 mm | |
| Height b | 12 +1-2 mm | |
| Processing time | max. 7 min | |
- Coat bead joint.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Carefully feed in the windshield with the special tool 0 492 609 (51 3 010) between the hood and the windshield panel.
- Fit the windshield at top.
- Evenly align the windshield at left and right.
- Fit the windshield at the bottom and press.
- Press the windshield upward until the rubber frame of the windshield evenly makes contact with the roof.
- Secure the windshield in this installation position with the yellow plastic adhesive tape (1) .
CONSUMABLE SPECIFICATION
| Plastic adhesive tape | 83195B3DD17 |
TECHNICAL DATA SPECIFICATION
| Gap dimension of windshield to windshield panel | ||
|---|---|---|
| 1 Windshield; 2 windshield panel | a | 4.3 +1.2-1.2 mm |
| b | 4.0 +1-1.5 mm | |
TECHNICAL DATA SPECIFICATION
| Gap dimension of windshield to windshield panel | ||
|---|---|---|
| 1 Windshield; 2 windshield panel | a | 4.3 +1.2-1.2 mm |
| b | 3.3 +1-1.5 mm | |