Prepare roof frame
- Clean the roof frame in the area (1) using a cleaning agent R2.
TECHNICAL DATA SPECIFICATION
| Air drying time after cleaning | ||
|---|---|---|
| Cleaning agent R2 | 5 min | |
CONSUMABLE SPECIFICATION
| Cleaning agent R2 | 500 ml | 83190417324 |
Cutting back the adhesive bead on the body
NOTE:
TECHNICAL INFORMATION
Do not cut back the residual bead until shortly before bonding.
Do not cut back the residual bead until shortly before bonding.
- Position folded scraper (2) as shown.
- Cut back adhesive bead (1) on body (3) to a thickness of approx. 0.5 mm.