Install the center console
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Install the center console (1), feeding in the wiring harness while doing this.
- Feed in the center console (1) at the dashboard and correctly position it.
- Fasten the wiring harness on the center console (1) and connect and lock any plug connections that are there.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Center console on tunnel Hexagon screw M6x18 tightening torque 4.6 Nm - Tighten down screws (2).TIGHTENING TORQUE SPECIFICATIONS
Center console at the dashboard Oval-head screw tightening torque 1.8 Nm - Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Center console on tunnel Hexagon screw M6x18 tightening torque 4.6 Nm
Follow-up work
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
- Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
- Refer to INSTALLING THE DECORATIVE TRIM ON THE LEFT AND RIGHT OF THE CENTER CONSOLE .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
- Refer to INSTALLING THE CUP HOLDER .