Installing the trim strip
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Precondition
Front door is open.
- Check clamp (1) for damage.
Defective or missing clamps (1) need to be replaced.
- If necessary, release the nozzles (2) from the clamps (1) and mount them on the bodywork.
Faulty or missing nozzles (2) must be replaced.
- Correctly position the clamps (1) on the trim strip (3).
- Carefully fit the trim strip (1) and thread the trim strip on to the side window.
- Carefully clip in the trim strip (1) starting at the rear with the clips (2).
- Tighten down screw (1).