Installing the front-end strut

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Install the front-end brace (3) and ensure the correct installation position as shown.
Replace the screw (1).
Parts: Screw

Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Front-end strut to upper rear connection
M 10x35 screw Replace screw	Tightening torque Angle of rotation	56 Nm 90°

Tighten nuts (2).

TIGHTENING TORQUE SPECIFICATIONS

Strut brace/ftont-end strut to holder
hexagon nut M8	Tightening torque	28 Nm