Installing the tailgate trim panel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Check if clips (1) are present and check them for damage.
Damaged or missing clips (1) must be replaced.
- Attach the tailgate trim panel (2) and clip it in at the clips (3).
- Mount the expanding rivets (1).
- Install the recessed grip (2) and tighten the screw (1).TIGHTENING TORQUE SPECIFICATIONS
Recessed grip on the tailgate Oval-head screw Tightening torque 1.8 Nm - Install the two holders (2) and tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Holder for the warning triangle on the tailgate Sheet metal screw Tightening torque 1.8 Nm - Install the warning triangle (2) and close the holders (1).
- Close both the holders (1).